The all-new Air Breeze. Quieter, more efficient, and precision engineered to deliver more energy at lower wind speeds than any other wind generator in its class. The Air Breeze is the latest generation of Air — with more than 100,000 sold in 120 countries — the world’s most popular small wind generator.
The Air Breeze Marine was specifically designed for the cruiser. It is an easy to install, easy to maintain wind turbine and will provide years of maintenance free service. It is designed for 20-45’ boats and can be mounted on the stern with an optional tower kit or on a mizzen mast.
Our marine unit is designed for salt water applications or locations on or within 20 miles of the ocean.
Available in 12V and 24V versions.

Data Sheet

Manual (pdf)

Tracking greatly improves the performance of your PV system. Trackers lt the PV panels follow the course of the sun. This greatly improves efficiency. An additional energy output of up to 40% in comparison to fixed installations is possible.
Applications
Remote housing
Livestock watering
Plantation irrigation
Pool filtration
Solar heating etc.

Active single-axis solar trackers
Maintenance-free 1-axis tracker, with PV module as sensor and power source in one

Lorentz ETATRACK active 400
Up to 500 Wp

Short Overview
1-axis, active solar tracker
Total module surface max. 4 m2, approx. 500 Wp
Maintenance-free
High reliability and life expectancy
No failure prone light sensor
Low power consumption, approx. 1.25 kWh per year
No unnecessary tracking movements
Designed to withstand wind speeds up to 120 km/h
Cost-efficient tracking system
2 years manufacturer's warranty against defects in material and workmanship

Applications
Single-axis solar tracking increases the energy return of solar modules, dependent on location, by 25% (e.g. Germany) up to 40% (e.g. central US, Korea, Spain) per year in average, respectively up to 55% during the summer months.
Use e.g. for
Remote homes
Livestock
Plantation irrigation
Pool filtration
Solar heating

We stock all Outback Flexware system components, please consult us via e.mail. Solarland is currently updating these on our web shop.
Flexware Integration Guide (pdf)

For applicatons with a single OutBack FX series inverter/charger and one MX series MPPT charge controller.
No mounting plate required.
Powder coated aluminum with stainless steel hardware.
Wall or shelf mount.
DC and or AC breaker enclosure - attaches directly to either end of a single FX series inverter / charger. Includes ground bus bar and DC breaker handle guard. Does not use the DCA or ACA for connection to an FX inverter/charger.

Holds up to five small 0.75" (19mm) AC rated panel mount breakers from 1 to 60 amps.
Holds up to four small 0.75" (19 mm) DC rated panel mount breakers from 1 to 80 amps.
Holds one large 1.5" (39 mm) DC rated panel mount breaker either 175 or 250 amp.

Requires: One Input/Output/Bypass Kit, one 15" 2/0 or 4/0 cable per invertir
Optional: One Ground Fault Protection, one GFCI AC outlet, one DC 500 amp shunt assembly

FW250 Users Guide (pdf)